Related Manuals for Yamaha F20D
Summarization of Contents
Important Manual Information
To the Owner
Information for the owner regarding the manual's content and usage.
Safety Information
Outboard Motor Safety
Essential safety precautions for operating and handling the outboard motor.
Fuel and Environmental Safety
Guidelines on fuel handling, emissions, modifications, and general boating safety.
Regulatory and Training Compliance
Information on operator training, safety resources, and adherence to marine laws.
General Information
Identification Numbers Record
Recording and referencing important identification numbers for the outboard motor.
Compliance and Marking
Details on the outboard motor's compliance with European directives and CE certification.
Manuals and Labels
Guidance on understanding user manuals and identifying warning labels on the motor.
Specifications and Requirements
General Specifications
Key technical details including dimensions, performance figures, engine specifications, and steering.
Fuel and Lubricant Requirements
Details on recommended fuel, engine oil grades, quantities, and gear oil specifications.
Propeller and System Specifications
Information on propeller selection, gear ratios, and trim/tilt system details.
Installation and Mounting
Guidelines for properly installing and mounting the outboard motor and battery.
Control and Electrical Requirements
Specifications for remote control systems and battery requirements for operation.
System Compatibility and Selection
Information on battery configurations, rectifier needs, and selecting the correct propeller.
Fuel and Operational Considerations
Guidance on fuel types, operating in specific water conditions, paint, and motor disposal.
Emergency Equipment
Recommended equipment to keep onboard for emergencies related to the outboard motor.
Components
Component Identification Diagram
Visual guide identifying key components and parts of the outboard motor.
Fuel System Components
Details on the fuel tank, its components, and connections.
Control System Components
Information on the remote control box and lever functions for operating the motor.
Throttle and Shift Controls
Explanation of controls for shifting gears and managing throttle.
Operational Indicators and Adjustments
Details on throttle indicators, friction adjustments, and the engine shut-off cord system.
Starting and Ignition Components
Information on manual starting mechanisms and the main power switch.
Steering and Trim Controls
Explanation of steering adjustment and power trim/tilt switch operation.
Cowling and Trim Tab Components
Details on the trim switch on the cowling and the trim tab assembly.
Trim Tab and Tilt Mechanism
Instructions on adjusting trim tabs and understanding the tilt lock mechanism.
Tilt Support and Cowling Fasteners
Information on securing the motor in tilted positions and fastening the engine cowling.
Motor Cleaning and Warning Indicators
How to use the flushing device and understand the alert indicator.
Instruments and Indicators
Oil Pressure and Overheat Alerts
Explains the function of low oil pressure and overheat alert indicators.
Engine Control System
Alert System Overview
Information on the engine alert system and specific alerts for overheat and low oil pressure.
Installation
Outboard Motor Mounting
Guidelines for mounting the outboard motor correctly on the boat's transom.
Mounting Height and Water Resistance
How mounting height affects water resistance and boat efficiency.
Securing the Outboard Motor
Procedures for securely clamping the motor to the transom and using restraint cables.
Operation
Initial Setup and Break-In
Steps for initial engine oil fill and the engine break-in procedure.
Pre-Operation Checks
Important checks to perform before starting the engine and understanding boat handling.
Fuel System and Controls Check
Checks for fuel level, fuel system integrity, and smooth operation of controls.
Engine Oil and Safety Cord
Procedures for checking engine oil level and inspecting the engine shut-off cord.
Engine and Cowling Checks
Inspecting engine, using flushing device, and correctly installing the top cowling.
Trim System and Battery Checks
Verifying the power trim and tilt system and checking the battery's condition.
Fueling Procedures
Safe procedures for filling the fuel tank, including necessary precautions.
Fueling and Starting Engine
How to supply fuel from a portable tank and the procedure for starting the engine.
Manual Start Procedure
Step-by-step guide for starting the engine using the manual starter.
Warm Engine Start and Throttle
Procedure for starting a warm engine and managing the throttle.
Electric Start Procedure
Instructions for starting the engine using the electric start system.
Post-Start Checks and Warm-up
Verifying cooling water flow and warming up the engine after starting.
Shifting and Stopping Procedures
How to shift gears and use stop switches for safe operation.
Stopping the Boat
Procedures and warnings for stopping the boat safely.
Stopping the Engine and Trimming
How to stop the engine and adjust the trim angle of the outboard motor.
Manual Trim Adjustment
Adjusting the trim angle for manual tilt models using the trim rod.
Power Trim and Boat Trim Adjustment
Adjusting power trim and optimizing boat trim for performance and efficiency.
Tilting Operation
Procedures for tilting the outboard motor up and down, including manual tilt methods.
Power Trim Tilting Procedure
Step-by-step guide for tilting the motor up using the power trim system.
Tilting Down Procedures
Instructions for tilting the outboard motor down using manual or power trim systems.
Shallow Water
Shallow Water Operation
Guidance on operating the boat safely in shallow water conditions.
Shallow Water Tilting
Using power trim to operate in shallow water, with relevant notices.
Cruising in Other Conditions
Salt Water Operation
Procedures for operating and flushing the motor after use in salt water.
Maintenance
Transporting and Storing the Motor
Guidelines for safely transporting and storing the outboard motor.
Long-Term Storage and Flushing
Procedures for long-term storage and flushing the cooling system in a test tank.
Lubrication and Engine Care
Information on greasing, spark plug maintenance, and changing gear oil.
Flushing the Power Unit
Step-by-step guide for flushing the outboard motor's power unit with fresh water.
Motor Cleaning and Surface Check
How to clean the motor exterior and inspect for paint damage.
Periodic Maintenance and Severe Conditions
Guidelines for regular maintenance intervals and considerations for severe operating conditions.
Maintenance Schedule (Chart 1)
Detailed schedule of maintenance tasks and intervals for the outboard motor.
Maintenance Schedule (Chart 2)
Additional maintenance schedule items, including exhaust and timing belt.
Greasing Points
Locations and types of grease required for various motor components.
Spark Plug Maintenance
How to clean, inspect, and adjust spark plugs for optimal engine performance.
Fuel Filter and Idle Speed Checks
Procedures for checking the fuel filter and inspecting the engine's idle speed.
Engine Oil Change Procedure
Step-by-step instructions for changing the engine oil.
Gear Oil and Fuel Tank Cleaning
How to change gear oil and clean the fuel tank.
Anode Inspection and Replacement
Instructions for inspecting and replacing sacrificial anodes for corrosion protection.
Battery Checks and Connection
Procedures for checking battery condition and correctly connecting battery cables.
Battery Disconnection
Safe procedures for disconnecting the battery cables.
Trouble Recovery
General Troubleshooting Guide
Common troubleshooting steps for starting problems and irregular engine idling.
System and Component Troubleshooting
Troubleshooting common issues related to fuel, ignition, alerts, oil, and other components.
Performance and Handling Troubleshooting
Diagnosing and resolving issues related to boat performance, handling, and power loss.
Emergency Actions and Impact Damage
Procedures for handling emergencies and assessing damage from collisions.
Fuse Replacement
Step-by-step guide for replacing blown fuses in the electrical system.
Power Trim and Tilt Issues
Troubleshooting steps when the power trim and tilt system is not functioning.
Starter System Troubleshooting
Guidance for diagnosing and resolving issues when the starter motor does not operate.
Manual Emergency Engine Start
Procedure for starting the engine manually in an emergency situation.
Electric Emergency Engine Start
Procedure for starting the engine using an emergency starter rope for electric models.
Submerged Motor Treatment
Immediate actions and precautions for a submerged outboard motor.
Need help?
Do you have a question about the F20D and is the answer not in the manual?
Questions and answers