Thermo Scientific ALPHA COND 560 Manual page 37

Electrical Data and Connections
Conductivity Input
Connection terminal
EMC Specifications
Emission
Susceptibility
Other
Power Input
Dimensions (W x H x D)
Weight (Estimated)
Ambient Temp. operating range
Maximum Relative Humidity
Calibration Default Settings (CAL dEF)
Conductivity
Calibration factor
Factory Default Settings (FCt dEF)
Conductivity
Calibration factor
Cell constant
Cell type
Measuring range
Line resistance
Temperature
Unit of measurement
Temperature compensation
Temperature coefficient
Temperature coefficient type
MTC (ATC Off)
Controller Output
Controller type
Relay status
Relay 1 (SP1)
Set point value
Relay function
Screw Terminal (3.5mm pitch)
8-pin, 2-pin & 5-pin terminal blocks, DC
power connector (1.2mm diameter)
EN 61 36
EN 61326
Universal +9 V DC Adaptor and 24V DC
Supply
96mm x 96mm x 66 mm
210g
o
0 to 40 C
o
80% up to 31 C decreasing linearly to
o
50% at 40 C
Reset to 1.000
Reset to 1.000
1.00
2-cell
0 to 2000 µS/cm
0.000 Ω
o
C
ATC On
2.1% (Both process & calibration temp.
coefficients)
Linear
o
25 C (Both process & calibration
temperature)
Limit control
De-energized
100 µS
Low