Setting The On Screen Display (Osd); Advanced Playback; Setting The 2Ch Direct/Stereo; Setting The Auto Surround Mode - Denon AVR-1907 Operating Instructions Manual

Advanced Setup – Part 1

Setting the On Screen Display (OSD)

Set whether or not to display the on screen display for indications
other than the menu screens.
1
D D H H
Press to select "On Screen Display", then press
ENTER
.
2
D D H H
Press to select the item, then press
Function/Mode Status:
• ON, OFF:
Select "ON" to display the on screen display when the input source
is selected, "OFF" if you do not want to display it.
Master Volume Status:
• ON, OFF:
Select "ON" to display the on screen display when the main volume
is adjusted, "OFF" if you do not want to display it.
Display Mode:
• MODE1:
Flickering is not prevented.
• MODE2:
Prevents flickering of the on screen display when there is no video
signal.
Use this mode if the on screen display is not displayed in "MODE1".
3
ENTER
Press .
1
2

Advanced Playback

Setting the 2ch Direct/Stereo

Make the 2-channel direct mode and stereo mode speaker settings.
1 D D H H
Press to select "Advanced Playback", then press
ENTER
.
F F G G
to set.
2 D D H H
Press to select "2ch Direct / Stereo", then press
ENTER
.
3 F F G G
Press to select "Basic" or "Custom".
Basic:
The "Speaker Setup" settings are displayed.
Custom:
The speaker settings for the 2-channel direct and stereo modes can
be changed.
4
D D H H
Press to select the item, then press
For a description of the settings for the different items, see pages
54 ~ 57.
5
ENTER
Press .
1
3

Setting the Auto Surround Mode

Set whether or not to store the surround mode last played for the
input signal.
The surround mode used at last for the three types of input signals
shown below is stored in the memory, and the signal is automatically
played with that surround mode the next time it is input.
1
2
3
F F G G
to set.
2
4
52
ENGLISH
Advanced Setup – Part 1
q Analog and PCM 2-channel signals (STEREO)
w 2-channel signals of Dolby Digital, DTS or other multi-channel
format (DOLBY PL II x Cinema)
e Multi-channel signals of Dolby Digital, DTS or other multi-
channel format (DOLBY/DTS SURROUND)
Default settings are indicated in ( ).
D D H H
Press to select "Auto Surround Mode", then
ENTER
press .
F F G G
Press to set.
ENTER
Press .
1
2
ENGLISH