Denon AVR-1905 Operating Instructions Manual page 56

ENGLISH
• Operating the surround mode and surround parameters from the main unit's panel.
1 Turn the SELECT knob to select the surround mode.
• When turned clockwise
DIRECT
• When turned counterclockwise
DIRECT
To select the surround mode while adjusting the surround parameters, tone defeat or tone control, press the SURROUND MODE
button then operate the selector.
2
Press the SURROUND PARAMETER button.
Press and hold in the surround parameter button to select the parameter you want to set.
• The parameters which can be set differ for the different surround modes. (Refer to "Surround Modes and Parameters" on page 57.)
3
Display the parameter you want to adjust, then turn the SELECT knob to set it.
NOTE:
• When making parameter settings, the display will return to the regular condition several seconds after the last button was pressed and
the setting will be completed.
Surround parameters e
ROOM SIZE:
This sets the size of the sound field.
There are five settings: "small", "med.s" (medium-small), "medium", "med.l" (medium-large) and "large". "small" recreates a small sound
field, "large" a large sound field.
EFFECT LEVEL:
This sets the strength of the surround effect.
The level can be set in 15 steps from 1 to 15. Lower the level if the sound seems distorted.
DELAY TIME:
In the matrix mode only, the delay time can be set within the range of 0 to 110 ms.
56
SELECT
(Main unit)
STEREO DOLBY PRO LOGIC
VIRTUAL SURROUND MATRIX
STEREO DOLBY PRO LOGIC
VIRTUAL SURROUND MATRIX
SURROUND
MODE
(Main unit)
SURROUND
PARAMETER
(Main unit)
II x DTS NEO:6 5CH/7CH STEREO
VIDEO GAME JAZZ CLUB
II x DTS NEO:6 5CH/7CH STEREO
VIDEO GAME JAZZ CLUB
1 2
MONO MOVIE
ROCK ARENA
MONO MOVIE
ROCK ARENA
1, 3