Remote Control Unit; Operating Denon Audio Components - Denon AVR-1905 Operating Instructions Manual

9 REMOTE CONTROL UNIT

Operating DENON audio components

• Turn on the power of the different components before operating them.
1 Set mode switch 1 to "AUDIO".
2 Set mode switch 2 to the position for the component to be
operated. (CD, CDR/MD or Tape deck)
3 Operate the audio component.
• For details, refer to the component's operating instructions.
While this remote control is compatible with a wide range of infrared controlled components, some models of components may not
be operated with this remote control.
1. CD player (CD) and CD recorder and MD recorder
(CDR/MD) system buttons
, : Manual search (forward and reverse)
6 7
: Stop
2
: Play
1
, : Auto search (cue)
8 9
: Pause
3
DISC : Switch discs
SKIP+ (for CD changers only)
3. Tuner system buttons
NOTE:
• TUNER can be operated when the switch is at "AUDIO" position.
1
3
2. Tape deck (TAPE) system buttons
: Rewind
6
: Fast-forward
7
: Stop
2
: Forward play
1
: Reverse play
0
A/B : Switch between decks A and B
SHIFT : Switch preset channel range
CHANNEL : Preset channel
+, – up/down
TUNING : Frequency
+, – up/down
BAND : Switch between the AM and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory
ENGLISH
3
2
31