Denon AVR-1905 Operating Instructions Manual page 44

ENGLISH
Multi-source playback
[1] Outputting a program source to an amplifier, etc., in a different room (ZONE2 mode)
1
Press the ZONE2/REC SELECT button.
The display switches as follows each
time the button is pressed.
2 With "ZONE2 SOURCE" displayed, turn
the FUNCTION knob and select the source
you wish to record.
3
Start playing the source to be output.
• For operating instructions, refer to the manuals of the
respective components.
4
To cancel, turn the function knob and
select "SOURCE".
[2] Remote control unit operations during multi-source playback (selecting the source)
1 Set the slide switch to "AUDIO" and "ZONE2".
2 Press the ZONE2 "ON" button.
To cancel the ZONE2 mode.
Press the ZONE2 "OFF" button.
3 Press the input source button.
• The ZONE2 source switches directly.
4 The output level of the ZONE 2 SPEAKER
OUT terminals can be controlled using the
VOLUME + and – buttons on the remote
control unit.
DEFAULT SETTING (ZONE2 VOLUME LEVEL) :
- - - dB (MINIMUM)
5 When the ZONE2 SOURCE function is set
to TUNER, the preset channel can be
selected using the CHANNEL + and –
buttons on the remote control unit.
(This is only possible when the main unit
in the ZONE2 mode.)
44
ZONE 2 /
REC SELECT
(Main unit)
FUNCTION
(Main unit)
FUNCTION
(Main unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
(Remote control unit)
2, 4 1 2
Display
CD TUNER AUX DVD /
ZONE2 VCR
ZONE2 SOURCE
NOTES:
• The signals of the source selected in the ZONE2 mode are also
output from the VCR and CDR/TAPE recording output terminals.
• Digital signals are not output to the ZONE2 output jacks.
2
2
3
5
1
1
4
2
VDP TV / DBS
V.AUX CDR / TAPE
OUTPUT
SURROUND
ZONE 2
BACK
(Light)
The main zone output can be
turned on and off with the MAIN
ON/OFF button.