3. Connect the power adapter to your modem
and plug it into the wall.
4. Plug one end of the phone cord into the
telephone jack of the modem (labeled with a
wall plug icon on the bottom of the case)
and the other end into the telephone jack.
8
If you wish to use your modem and phone with
the same telephone wall jack, plug your phone's
cord into the other available port on the back of
your modem.
Once your modem is connected, you'll need to
install the MacComCenter software included
with your modem. This allows you to send and
receive faxes, surf the Internet, call an online
service to access e-mail, or call a local bulletin
board (BBS).
For more information on installing
For more information on installing
the communications software and
the communications software and
other applications included with
other applications included with
your modem, see the Software and
your modem, see the Software and
Registration chapter.
Registration chapter.