US Robotics 005689-03 Manual page 37

Command Set Command Set
$ Use in conjunction with D, S, or &
commands (or just AT) to display a
basic command list; online help.
A Manual Answer: goes off hook in
answer mode. Pressing any key
aborts the operations.
A/ Re-executes the last issued
command. Used mainly to redial.
This does not require the AT prefix
or a Carriage Return.
Aborts off-hook dial/answer
Any key
operation and hangs up.
AT Required command prefix, except
with A/ and +++. Use alone to test
for OK result code.
Bn U.S./ITU-T answer sequence.
B0 ITU-T answer sequence
B1 U.S. answer tone
38
Dn Dials the specified phone number.
Includes the following:
L Dials the last dialed
number.
P Pulse (rotary) dial
R Originates call using
answer (reverse)
frequencies.
Sn Dials the phone number
string stored in NVRAM at
position n (n = 0 3). Phone
numbers are stored with the
&Zn=s command.
T Tone dial
, (Comma) Pause. See S8
definition, which it's linked
to.
; (Semicolon) Return to
Command mode after
dialing
" Dials the letters that follow
(in an alphabetical phone
number).