4
How Do I...?
Use this section to find out how to perform the following common tasks related to your print server and network printer
Print a test page
1
From the Start menu, click Settings
2
From the Printers folder, right-click the icon for your network printer.
3
Select Properties from the sidebar menu.
4
From the General tab, click Print Test Page.
Print a print server setup page
Once the print server is installed and the printer is associated with a port, you can print a setup page that lists the network
settings, such as the IP address, Netmask, Gateway, DHCP status, and so on.
Note: Your printer must support a flat text file to print a setup page.
To print a print server setup page, do one of the following:
•
From the print server LCD:
1
Press
until Menu appears. Press
2
Press
until Reports appears. Press
3
Press
until Setup Page appears. Press
Note: If your print server has multiple ports, you will be prompted to select a port before the test page will
print.
•
If you already know the IP address:
1
Open your browser.
2
Enter the IP address of the print server as the URL. For example, http://192.168.0.1.
3
Click Reports.
4
Click Print Server Setup Page.
5
Click File
Uninstall the MarkNet N7000 Series software
1
From the Start menu, click Programs or All Programs
Uninstall.
2
Follow the instructions on your screen.
Printers.
Print.
.
.
.
Lexmark
N7000 Series
How Do I...?
9
.
N7000 Series Software