Scanning; Scanning Using Applications; Scanning Using Xsane; Scanning Using Openoffice.org - Lexmark Dot Matrix User Manual

Scanning

For more information on selecting a scan job from the printer control panel, see the printer User's Guide.

Scanning using applications

Scanning using XSane

1
Open a terminal window, and then type xsane. Press Enter.
2
From the "device detection" dialog, navigate to:
Available devices > select your printer > OK
3
From the "Network:scanner" dialog, click Window > Show standard options.
4
If necessary, adjust other scan settings.
5
From the "Network:scanner" dialog, click Scan.
6
Place your document in the Automatic Document Feeder (ADF) or on the scanner glass.
7
From the printer control panel, select your scan job.

Scanning using OpenOffice.org

Note: You may use Writer, Calc, Impress, or Draw only.
1
From an OpenOffice.org application toolbar, do either of the following:
•
Click Insert > Picture > Scan > Select Source.
•
Click Insert > Graphics > Scan > Select Source.
2
From the "Device Used" menu, select your printer.
3
If necessary, select other options, and then click OK.
4
From the application toolbar, do either of the following:
•
Click Insert > Picture > Scan > Request.
• Click Insert > Graphics > Scan > Request.
5
Place your document in the Automatic Document Feeder (ADF) or on the scanner glass.
6
From the printer control panel, select your scan job.
Scanning
7