Related Manuals for AE RC10GT 7061
Summarization of Contents
RC10GT Gas Trucks Kit Information
Kit Types Overview
Details on the different RC10GT kit variants: Factory Team, Team GT, and GT RTR Plus.
Required Equipment for Operation
Lists necessary tools, fuel, batteries, and other items required to run the gas truck.
Pre-Assembly and Manual Guide
Customer Support and Contact
Provides contact details for customer support and company information.
Building Preparation and Safety
Guidance on reading the manual, opening parts bags, and handling tools safely.
Manual Format Explanation
Details on how to interpret part numbers, diagrams, and instructions within the manual.
BAG A: Servo Saver Assembly
Servo Saver Assembly Steps
Detailed instructions for assembling the servo saver components.
Servo Saver Installation
Steps to install the assembled servo saver onto the chassis.
BAG B: Front End Assembly
Front Arm Assembly
Instructions for assembling the front suspension arms and connecting them to the bulkhead.
Front Shock Tower Attachment
Steps to mount the front shock tower to the front bulkhead assembly.
Front Assembly and Bumper Attachment
Attaching the front end to the chassis and installing the front bumper.
Nose Tube Mounts Installation
Securing the nose tube mounts to the chassis.
BAG C: Steering and Caster Blocks
Steering (Caster) Block Assembly
Detailed steps to assemble the steering and caster blocks with ball ends and nuts.
Caster Blocks to Arms
Instructions for attaching the assembled caster blocks to the front a-arms.
BAG D: Engine and Transmission Mounts
Engine Mount Attachment
Steps to attach engine mounts to the chassis, adjusting for gear mesh.
Transmission Mount Attachment
Installing the transmission mount brace to the chassis for TEAM/FT models.
BAG E: Differential Gear Setup
Differential Gear Setup
Instructions for lubricating and assembling the differential gear components.
Hub Assembly and Adjustment
Detailed steps for assembling and adjusting the differential hubs and checking alignment.
Transmission Assembly
Steps to assemble the left and right transmission cases with gears and shafts.
BAG F: Brake and Spur Gear
Brake Adapter Assembly
Steps to assemble the brake adapter, brake disc, and clutch hub.
Torque Control Assembly
Instructions for assembling the torque control spring, washers, and locknut.
Brake Bracket Installation
Mounting the brake bracket assembly onto the transmission.
Brake Cam Installation
Installing the brake cam and clip onto the brake bracket.
Spur Gear Installation
Mounting the spur gear onto the slipper hub.
Transmission Mounting
Attaching the assembled transmission to the chassis.
BAG G: Rear Bulkhead and Shock Tower
Rear Bulkhead Setup
Assembling the rear bulkhead with ball ends and attaching it to the chassis.
Rear Shock Tower Installation
Mounting the rear shock tower to the rear bulkhead.
Transmission Brace Attachment
Securing the transmission brace to the rear bulkhead and transmission.
BAG H: Rear Suspension Arms
Rear Suspension Arm Assembly
Steps for assembling the rear suspension arms and shock mounts.
Rear A-Arms and Bumper Mounting
Attaching the rear a-arms and bumper to the chassis.
BAG I: MIP CVD Axles
MIP CVD Axle Assembly (TEAM/FT)
Detailed instructions for assembling MIP CVD axles for TEAM/FT models.
Rear Axle Assembly (RTR+/TEAM BUILT)
Steps for assembling rear axles for RTR+ and TEAM BUILT models.
Rear Axle Assembly (TEAM BUILT)
Instructions for assembling rear axles for TEAM BUILT models.
BAG J: Turnbuckles and Pivot Balls
Turnbuckle Setup
Guidance on setting up front and rear turnbuckles with ball cups and eyelets.
Turnbuckle Installation
Steps for installing the assembled turnbuckles onto the chassis and hub carriers.
BAG K: Body Mounts
Front Body Mounts Installation
Attaching the front body mounts and brace assembly to the front bulkhead.
Rear Body Mounts Installation
Securing the small round posts and rear body mounts to the rear shock tower.
BAG L: Shock Assembly and Filling
Shock Piston Trimming
Instructions for trimming shock pistons to remove burrs for smooth action.
Shock Assembly Tool Usage
Steps for using the shock assembly tool with spacers and O-rings.
Shock Shaft and Body Assembly
Assembling the shock shaft, piston, and body components.
Shock Filling and Rebound Setting
Guidance on filling shocks with oil and setting the correct rebound.
Need help?
Do you have a question about the RC10GT 7061 and is the answer not in the manual?
Questions and answers