Screen Adjustment; Nr (Noise Reduction); Initializing (Reset To Original Factory Value); Split Zoom - LG 50PM1M - - 50" Plasma Panel Owner's Manual

U514Aen 81/11/9 2:28 PH Page 28
Screen Adjustment
© Screen Adjustment
You can select 3D NR or MPEG NR to reduce the picture noise which may appear on the screen while watching the set.
1. Press the MENU button and then use _, / T button to select the SCREEN menu.
2. Press the 1_ button and then use _, / _" button to select NR.
3. Press the _ button and then use _, / _" button to select 3D NR or MPEG NR.
4. Press the ",_ / _,"button to make appropriate adjustments.
5. Press the ENTER button to save.
Reset is unique to each function: Position, Zoom +/-.
Use the Reset option to initialize the adjusted settings.
1. Press the MENU button and then use _, / T button to select the SCREEN menu.
2. Press the 1_button and then use _, / _" button to select Reset.
3. Press the _ button.
iiiiiiiiiiiiii
Enlarges the picture in correct proportions.
Split Zoom can be used for all input sources.
In 2-Split Zoom mode, you can only move the image up or down.
If an image is enlarged, a section can be viewed without using Split Zoom.
1. Press the SPLIT ZOOM button repeatedly to select either 2, 4, or 9 Split Zoom.
2. Press the number button corresponding to the section you wish to enlarge. You can move within the enlarged pic-
ture using the A / T / ",_/ _ button. To return to normal viewing, press the SPLIT ZOOM button again.
Example of choosing 5.
Section 5 is enlarged to fill
the screen.
28 Plasma Monitor