Auto Off / Sleep Timer - LG 50PM1M - - 50" Plasma Panel Owner's Manual

U514Aen 81/11/9 2:28 PH Page 23
Time Setting
If set to on and there is no input signal, the Monitor turns off automatically after 10 minutes.
1. Press the MENU button and then use A, / T button to select the TIMER menu.
2. Press the _ button and then use _, / _" button to select Auto of_.
3. Press the _ button and then use _, / _" button to select On or O_f.
4. Press the ENTER button to save.
The Sleep -Iqmer turns the Monitor off at the preset time. Note that this setting is cleared when the Monitor is turned
off.
1. Press the SLEEP button repeatedly to select the number of min-
utes. First the O_f option appears on the screen, followed by the
following sleep timer options: 10, 20, 30, 60, 90, 120, 180, and
240 minutes.
2. When the number of minutes you want is displayed on the
screen, press the ENTER button. The timer begins to count down
from the number of minutes selected.
3. To check the remaining minutes before the Monitor turns off, press
the SLEEP button once.
4. To cancel the Sleep -Iqmer, press the SLEEP button repeatedly to
select O_f.
Owner's Manual 23