Connection Options; External Equipment Connections; Vcr Setup / Cable Tv Setup - LG 50PM1M - - 50" Plasma Panel Owner's Manual

U514Aen 81/11/9 2:28 PH Page 11
External Equipment Connections
© External Equipment Connect ons
NOTE: All cables shown are not included with the monitor.
To avoid picture noise (interference), leave an adequate distance between the VCR and monitor.
Use the ISM Method (on the Special menu) feature to avoid having a fixed image remain on the screen for a long period of
time. Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen
may remain visible on the screen.
Connection Option
1. Connect the audio and video cables from the
VCR's output jacks to the set input jacks, as
shown in the figure.
When connecting the set to VCR, match the
jack colors (Video = yellow, Audio Left = white,
and Audio Right = red).
If you connect an S-VIDEO output from VCR to
the S-VIDEO input, the picture quality is
improved; compared to connecting a regular
VCR to the Video input.
2. Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner's
manual.)
3. Select the input source with using the INPUT
button on the remote control.
Do not connect to both Video and S-
Video at the same time. In the event
that you connect both Video and the
S-Video cables, only the S-Video will
work.
After subscribing to a cable TV service from a local provider and installing a converter, you can watch cable TV programming.
The set cannot display TV programming unless a TV tuner device or cable TV converter box is connected to the set.
For further information regarding cable TV service, contact your local cable TV service provider(s).
Connection Option
1. Connect the audio and video cables from the Cable Box's output
jacks to the set input jacks, as shown in the figure.
When connecting the set to a Cable Box, match the jack colors
(Video = yellow, Audio Left = white, and Audio Right = red).
2. Select the input source with using the INPUT button on the
remote control.
3. Select your desired channel with the remote control for cable
box.
Cable Box
Owner's Manual 11