How To Print The Configuration Page - Brother 2100P - NC Print Server User Manual

External 10/100base-tx print server

Table of Contents

APPENDIX

How to print the Configuration page

To print the configuration page, use a fine ball point pen to hold down the Test

button on the back of the print server for less than 5 seconds.

Note: If you hold the Test button on the back of the print server for more than 5

seconds all network settings will be reset to default.

Figure 1 Test button

Some models may be unable to print the configuration page. In that case, you can

check the printer network configuration using BRAdmin Professional utility or Web

Based Management.

APPENDIX-2

Table of Contents

Do you have a question about the 2100P - NC Print Server and is the answer not in the manual?

Nc-2100h Nc-2100p