Changing The Workgroup/Domain Name Using Telnet Or A Web Browser; Netbios Port Monitor For Windows 95/98/Me, Nt4.0/2000/Xp - Brother 2100P - NC Print Server User Manual

CHAPTER 4 NETBIOS PEER-TO-PEER PRINTING
Changing the workgroup/domain name
using TELNET or a web browser
If you are unable to use a BRAdmin Professional utility or a web browser, you can
use TELNET.
When you are connected to the print server, enter the default password "access" in
response to the "#" prompt. Type in anything in response to the "Enter Username>"
prompt, you will then be at the "Local>" prompt.
Now enter the command:
SET NETBIOS DOMAIN domainname
EXIT
Where domainname is the name of the domain or workgroup that you are on. If you
are not sure what your domain name or workgroup name is look in the Identification
tab in your Windows 95/98/Me/NT 4.0 network applet.
You can also use a standard WWW browser to change the NetBIOS name, to do this
connect to the print server using its IP address and then select the "Configure
NetBIOS" option from the print server configuration screen, enter you
workgroup/domain name into the "Domain Name" text box. Make sure you submit
the changes.
NetBIOS Port Monitor for Windows
95/98/Me, NT4.0/2000/XP
This software requires the TCP/IP transport protocols to be installed on your
Windows 95/98/Me, NT4.0/2000 computer. To install those protocols refer to your
Windows documentation.
If you are using the TCP/IP protocol, the proper IP address should be defined on
both the Brother print server and your client PC.
4-3