Selection Of Resolution Setting (Scale); Setting The Network Setup; Setting The Ip Address - Denon AVC-A1XV Operating Instructions Manual

ENGLISH
System Setup
SCALE D H F G
ENTER
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit

Selection of resolution setting (SCALE)

The resolution ("Resolution") can be changed by pressing SCALE.
SCALE
Press
When SCALE is pressed, the current setting is shown on the
display. If SCALE is pressed while the current setting is displayed,
the "Resolution" setting can be changed.
ENTER
• When "HDMI" is selected for the "Scaler" setting:
480p/576p
• When "Component" is selected for the "Scaler" setting:
480p/576p

Setting the Network Setup

• "Network Setup" is added to the "Option Setup" items at "System
Setup Menu".
D H F G
• If you are using a broadband router (DHCP function), there is no
need to make the settings at "IP Address" and "Proxy", since the
DHCP function is set to "ON" in the AVC-A1XV's default settings.
• If the AVC-A1XV is being used connected to a network without the
DHCP function, the network settings must be made. In this case,
some knowledge of networks is required.
SCALE
.
1080i 720p
Through 1080p
1080i 720p
Through
7
ENGLISH

Setting the IP Address

Set this when "OFF" is set for "DHCP".
1
D D H H
Press to select "Network Setup", then press
ENTER
.
2
D D H H
Press to select "IP Address", then press
3
F F G G
Press to select "OFF".
• The DHCP function is disabled.
4
D D H H
Press to select the desired setting item, then
G G D D H H
press to input the address.
IP Address:
Set the IP address within the ranges shown below. The Network
Audio function cannot be used if other IP addresses are set.
CLASS A: 10.0.0.0 ~ 10.255.255.255
CLASS B: 172.16.0.0 ~ 172.31.255.255
CLASS C: 192.168.0.0 ~ 192.168.255.255
Subnet Mask:
When connecting an xDSL modem or terminal adapter directly to
the AVC-A1XV, input the subnet mask indicated in the
documentation supplied by your provider. Normally input
255.255.255.0.
Gateway:
When connected to a gateway (router), input its IP address.
Primary DNS / Secondary DNS:
If there is only one DNS address indicated in the documentation
supplied by your provider, input it at "Primary DNS". If there are
two or more DNS addresses, input the first one at "Second DNS".
5
ENTER
Press .
System Setup
ENTER
.