Additional Picture Adjustment Options
5 Additional Picture Adjustment Options
To take advantage of all that your flat panel display offers, browse this chapter for features and functions that
enhance your viewing experience. Most sections deal with adjusting the picture and arranging screen/menu
items while the remaining sections provide power management options. Apply as many or as few of these
changes as desired.
5.1 Choose an AV Option (Video, Game, etc.)
Similar to the purpose for the room light sensor, the AV Option or Selection depends upon the brightness of the
environment and the movie on screen. Images can be from either an AV Source or from a PC. Both sources are
Choose from among the seven AV Selections for the best image from an external AV Source. Use either the
remote control or the Home Menu to select the AV source. For a PC, skip down to "5.1.3 Choose a PC Source."
If the AV source is a Game Control, select GAME and refer to "5.1.4 Set the Panel to Recognize a Game Console"
for more information.
AV Source through the Remote Control
Follow the directions below to set the AV Selection for an external AV Source.
1 ) Press AV SELECTION on the remote control.
The current AV selection appears.
2 ) Press AV SELECTION again before the displayed mode disappears.
Each press cycles the options in the order shown below.
3 ) Allow the AV Selection screen to disappear.
When the menu screen disappears, the panel locks in the last viewed option.
automatically adjusts the image quality for the
brightness level of the viewing area
for a highly defined image in a normally bright
for a very sharp image with maximum contrast but
manual image quality adjustment unavailable
reflects input signals as faithfully as possible for
checking image materials, for example
for sports programs
lowers image brightness for easier viewing
allows customizing settings as desired (set the
mode for each input source)