Table of Contents
Advertisement
Contents
1
2
3
3.1
3.2
3.3
3.4
Cutting Attachment
3.5
Tightening Torques
3.6
Special Accessories
3.6.1
3.6.2
4
Clutch, Chain Drive,
Chain Brake and
Chain Tensioner
4.1
Clutch Drum and Chain
4.2
4.3
4.4
4.4.1
4.4.2
4.5
4.5.1
4.5.2
Installing
4.5.3
4.5.4
4.5.5
Checking Operation of
Chain Brake
4.6
Chain Tensioner
4.7
Bar Mounting Studs
5
5.1
Installing Muffler
5.2
Exposing the Cylinder 20
5.3
Cylinder and Piston
5.3.1
5.3.2
5.4
5.5
5.5.1
5.5.2
5.6
Crankcase Leakage
Test
5.6.1
5.6.2
5.6.3
034, 036, 036 QS
2
5.7
Replacing the Oil
Seals
3
6
4
6.1
4
6.2
4
5
6.3
5
6.4
6
6.4.1
7
6.4.2
Installing
7
6.5
7
6.5.1
Installing
6.5.2
8
7
7.1
Routine
8
7.2
9
9
7.3
10
7.3.1
11
7.3.2
Replacing the Rewind
12
Spring (036, 036 QS)
14
7.4
15
Spring
16
17
8
17
18
8.1
19
9
9.1
19
Function
9.2
20
20
9.3
21
24
9.4
24
24
10
26
31
10.1
31
32
33
10.2
33
10.3
10.4
34
10.5
34
35
37
11
38
38
11.1
38
11.2
39
11.3
11.4
39
40
11.5
40
12
12.1
40
12.2
12.3
40
41
12.4
41
12.5
41
12.6
12.7
42
12.8
42
42
13
43
13.1
43
13.2
44
45
46
47
47
50
© 2001 Andreas Stihl AG & Co., Waiblingen
51
51
53
54
54
55
55
55
56
56
59
59
60
61
62
66
67
68
69
69
71
71
72
1
Advertisement
Table of Contents
Troubleshooting
Related Manuals for Stihl 36
Summarization of Contents
Specifications
Engine
Engine specifications including displacement, bore, stroke, compression ratio, and power.
Fuel System
Details on carburetor settings, fuel tank capacity, and fuel mixture ratios.
Ignition System
Transistorized magneto ignition system details, spark plug type, and gap.
Cutting Attachment
Information on guide bars, cutting lengths, chains, sprockets, and chain lubrication.
Tightening Torques
Torque values for various fasteners used in the chainsaw assembly.
Special Accessories
Lists special accessories available for user and service.
For User
Special accessories available for the user.
For Service
Special accessories available for service.
Clutch, Chain Drive, Chain Brake and Chain Tensioner
Clutch Drum and Chain Sprocket
Steps for removing and inspecting the clutch drum and chain sprocket.
Replacing the Chain Catcher
Instructions for removing and replacing the chain catcher component.
Clutch
Steps for removing and installing the clutch assembly.
Chain Brake (034, 036)
Procedure for removing the chain brake assembly for models 034 and 036.
Removing
Detailed steps to remove the chain brake components.
Installing
Detailed steps for reinstalling the chain brake assembly.
Chain Brake (036 QS)
Procedure for removing the chain brake assembly specifically for model 036 QS.
Removing
Detailed steps to remove the chain brake components for 036 QS.
Installing
Detailed steps for reinstalling the chain brake assembly for 036 QS.
Checking Play
How to check for play in the chain brake mechanism.
Adjusting Play
How to adjust play in the chain brake system.
Checking Operation of Chain Brake
How to check the proper operation of the chain brake.
Chain Tensioner
Procedure for adjusting and maintaining the chain tensioner.
Bar Mounting Studs
Instructions for servicing the bar mounting studs.
Engine
Removing and Installing Muffler
Steps for removing and installing the muffler assembly.
Exposing the Cylinder
Procedure to access the cylinder for maintenance.
Cylinder and Piston
Steps for removing and installing the cylinder and piston.
Removing
Detailed steps to remove the cylinder and piston from the engine.
Installing
Detailed steps to install the cylinder and piston onto the engine.
Piston Rings
Instructions for removing, cleaning, and installing piston rings.
Crankcase
Procedures related to the crankcase, including removal and installation.
Removing the Crankshaft
Steps for removing the crankshaft from the crankcase.
Installing the Crankshaft
Steps for installing the crankshaft into the crankcase.
Crankcase Leakage Test
Procedures for testing the crankcase for leaks.
Preparations
Preparatory steps before performing the crankcase leakage test.
Pressure Test
Steps for performing a pressure test on the crankcase.
Vacuum Test
Steps for performing a vacuum test on the crankcase.
Replacing the Oil Seals
Instructions for replacing oil seals without full crankcase disassembly.
Ignition System
Ignition Lead/ Spark Plug Boot
Procedures for removing and installing the ignition lead and spark plug boot.
Short Circuit Wire/ Ground Wire
How to remove and install the short circuit and ground wires.
STOP Contact
Checking and replacing the STOP contact switch.
Flywheel
Procedures for removing and installing the flywheel.
Removing
Steps to remove the flywheel.
Installing
Steps to install the flywheel.
Ignition Module
Procedures for removing and installing the ignition module.
Removing and Installing
Detailed steps for removing and installing the ignition module.
Ignition Timing
Information on ignition timing for electronic systems.
Rewind Starter
Routine Maintenance
Routine maintenance procedures for the rewind starter.
Rope Rotor, Pawls, Starter Rope, Rope Guide Bush
Information on components of the starter rope system.
Rewind Spring
Procedures for replacing the rewind spring.
Replacing the Rewind Spring (034)
Steps to replace the rewind spring on model 034.
Replacing the Rewind Spring (036, 036 QS)
Steps to replace the rewind spring on models 036 and 036 QS.
Tensioning the Rewind Spring
How to properly tension the rewind spring.
AV Handle System
Repair
General repair procedures for the AV handle system.
Master Control
Details on the Master Control system.
Construction and Function
Description of the Master Control's construction and how it functions.
Throttle Trigger/Interlock Lever (034, 036)
Procedures for the throttle trigger and interlock lever on models 034 and 036.
Throttle Trigger/Interlock Lever/Switch Lever (036 QS)
Procedures for the throttle trigger and switch lever on model 036 QS.
Switch Shaft
Procedures for removing and installing the switch shaft.
Electric Handle Heating System (034, 036)
Troubleshooting
Troubleshooting guide for the electric handle heating system.
Troubleshooting Chart
A flowchart to diagnose problems with the heating system.
Test Connections and Test Values
Specifies connections and expected values for testing the heating system.
Heater Switch
Steps for removing and installing the heater switch.
Heating Element in Rear Handle
Procedure for replacing the heating element in the rear handle.
Heating Element in Front Handle
Information on the front handle heating element, which is not replaceable.
Chain Lubrication
Pickup Body
Procedures for removing and cleaning the pickup body.
Suction Hose
Procedures for removing and installing the suction hose.
Vent Valve
Instructions for removing and installing the vent valve.
Removing and Installing the Oil Pump
Steps for removing and installing the oil pump assembly.
Servicing the Oil Pump
Detailed procedures for servicing the oil pump.
Fuel System
Air Filter
Procedures for removing, cleaning, and installing the air filter.
Leakage Testing the Carburetor
How to test the carburetor for leaks.
Removing and Installing the Carburetor
Steps for removing and reinstalling the carburetor.
Servicing the Carburetor
Detailed procedures for servicing the carburetor.
Adjusting the Carburetor
How to adjust the carburetor settings for optimal performance.
Tank Vent
Procedures for checking and cleaning the tank vent.
Fuel Filter and Fuel Hose
Instructions for cleaning the fuel tank and replacing filter/hose.
Tank Housing
Procedures for removing and installing the tank housing.
Removing and Installing
Detailed steps for tank housing removal and installation.
Special Servicing Tools and Aids
Special Servicing Tools
A list of specialized tools and their part numbers.
Servicing Aids
A list of servicing aids like lubricants and adhesives.
Need help?
Do you have a question about the 36 and is the answer not in the manual?
Questions and answers