Step 1: Connecting And Charging Your Handheld - Palm 1047ML User Manual

CHAPTER 1
[ ! ]
Before You Begin
If you're upgrading from
another Palm Powered™
device, synchronize your
old handheld with your
old desktop software.
Tip
On a laptop computer, the
USB port may be located
on the side.
Tip
After the initial charge,
charge your handheld
at least half an hour
every day.
®
Palm T|X Handheld
Setting Up Your Handheld and Your Computer

Step 1: Connecting and charging your handheld

0
1
Connect your handheld:
a. Plug the USB sync cable into
your handheld and into a USB
port on the back of your
computer.
b. Plug the AC charger into the
Multi-connector on the sync
cable and into an outlet.
2
Charge your handheld for three hours. Be sure your handheld is fully charged
before going on to Step 2.
Done
4