Related Manuals for Arctic Cat 2010 M6
Summarization of Contents
Reference Information
Parts and Accessories
Information on sourcing genuine Arctic Cat parts and accessories for maintenance and upgrades.
General Information
Snowmobile Identification
Location and importance of Vehicle Identification Number (VIN) and Engine Serial Number (ESN).
Control Locations
Overview of typical control placements on the handlebars and dashboard for operation.
Gasoline-Oil
Recommended gasoline octane and oil types for different engine sizes and their specifications.
Engine Break-In
Procedure for correctly mixing fuel and oil for the initial engine break-in period.
Speedometer/Tachometer
Explanation of gauge functions, indicator icons, and digital readout displays for speed and RPM.
Coolant Temperature Warning Icon
Details on the coolant temperature warning light and its meaning, with action steps.
Low Oil Warning Icon
Explanation of the low oil warning light and recommended actions for maintaining oil levels.
Handlebar Tilt
Procedure for adjusting the handlebar position for operator comfort and control.
Cooling System
Description of the liquid cooling system, inspection, and coolant type recommendations.
Track Studs (Crossfire Models)
Instructions and warnings regarding the installation and use of track studs for improved traction.
Reverse Operation
Explanation of the reverse function, its operation, and important safety precautions.
Arctic Power Valve (APV) System
Details on the APV system, its function, and recommended oil for operation.
Operating Instructions
Starting and Stopping Engine
Step-by-step guide for safely starting and shutting down the snowmobile engine.
Braking
Essential information on using the hydraulic brake system, including heat transfer and pad wear.
Emergency Stopping
Methods and procedures for safely stopping the snowmobile in various emergency situations.
Varying Altitude Operation
Guidance on snowmobile setup and performance adjustments for different operating altitudes.
Lubrication
Act Drive Gear Case (Each Season Prior to Storage)
Procedure for flushing and refilling the ACT drive gear case lubricant annually.
Front Suspension
Recommended monthly greasing procedure for the front suspension components.
Rear Suspension (Every 40 Operating Hours)
Guidelines for lubricating rear suspension grease fittings at specified intervals.
Maintenance
Periodic Maintenance Checklist
A comprehensive checklist of daily, weekly, monthly, and seasonal maintenance tasks.
Fuel System
Information on fuel additives, fuel pickup valves, and system maintenance.
Spark Plugs
Instructions for removing, installing, and checking spark plugs for proper engine performance.
Checking/Adjusting APV Cables
Procedure for inspecting and adjusting the Arctic Power Valve (APV) control cables for optimal performance.
Bleeding Brake System
Procedure to remove air bubbles from the brake system for proper lever feel.
Checking/Changing Brake Pads
Guidance on inspecting brake pad thickness and replacing them when worn.
Drive Belt
Importance of drive belt condition and specifications, and checks for wear.
Checking/Adjusting Drive Belt Deflection
How to check and adjust the drive belt's tension and fit for optimal power transfer.
Track Tension
Importance of proper track tension for performance and safety, and how to check it.
Track Alignment
Procedure for checking and adjusting track alignment to prevent premature wear.
Suspension
How to adjust suspension components like springs and limiter straps for ride preference.
Adjusting Front Shock Springs (STD)
Instructions for adjusting front shock spring pre-load to modify ski pressure.
Adjusting Rear Spring Pre-Load
Guide to setting rear spring pre-load based on rider weight and desired ride comfort.
Lights
Information on replacing taillight/brakelight LEDs and headlight bulbs.
Adjusting Headlight Aim
Procedure for correctly aiming the headlight beams for optimal visibility and safety.
Ski Wear Bars
Information on checking and replacing ski wear bars to maintain steering control and ski life.
Adjusting Ski Stance
How to adjust ski stance spacers to modify ski pressure and handling.
Rail Wear Strips
Guidance on checking and replacing rail wear strips to prevent track damage.
Performance Tips
Drive Belt Deflection
Detailed steps to check and adjust drive belt deflection for optimal power delivery.
Drive Clutch/Driven Pulley Offset
Procedure for checking and correcting the alignment offset between the drive and driven pulleys.
Drive Clutch/Driven Pulley Parallelism
How to check and adjust the parallelism of the drive and driven pulleys for belt longevity.
Need help?
Do you have a question about the 2010 M6 and is the answer not in the manual?
Questions and answers