Blind Hem Stitching - Toyota ESM21 Instruction Manual

Sewing

5. Blind hem stitching

In this sewing method the stitch cannot be seen on the right side of the fabric.
Fold back the fabric so that the folded area
protrudes by about 5 to 7mm.
Iron and tack by hand.
Position the fabric so that the needle slightly
catches the fold when the needle moves to the
left.
Lower the presser foot and start sewing.
The part of the stitch that catches the fold will be
visible from the right side of the fabric.
Sew the stitch evenly so that the part of the stitch
that catches the fold is not too large or too small.
After sewing, pull out the tacking, open out the
fabric.
32