III. Sewing
1. Straight stitching and reverse sewing
Reverse sewing is performed at the beginning and end of sewing to prevent the thread from unraveling.
Do not pull the fabric excessively while sewing.
Doing so could break the needle and cause an injury.
Straight stitch
End of sewing
1. Turn the handwheel towards
2. Turn the pattern selection
After finishing sewing, turn handwheel towards
yourself until the needle is in the highest position.
Raise the presser foot and pull out the fabric to the
rear.
25
Sewing
yourself to raise the needle.
dial to choose the pattern.
Set the fabric and lower the
presser foot lever.
Step on the foot controller
to begin sewing.