Related Manuals for Arctic Cat 2015 M 8000
Summarization of Contents
General Information and Controls
Snowmobile Identification
Details VIN and ESN for identification and warranty purposes.
Control Locations
Diagrams showing placement of various controls on handlebars for different models.
Fuel and Oil Requirements
Recommended Gasoline
Guide to appropriate gasoline types, octane, and ethanol content.
Recommended Injection Oil
Specifies the required oil for the engine's oil injection system.
Break-In Procedures
Engine Break-In
Instructions for breaking in the engine for optimal longevity and performance.
Drive Belt Break-In
Process for conditioning a new drive belt for optimal flexibility and life.
Gauge Displays and Indicators
Standard Gauge Operation
Reading and using the standard speedometer and tachometer display.
Multi-Function Display Navigation
Navigating through odometer, trip meters, hour meter, and clock modes.
Setting the Clock
Procedure for setting the onboard clock on electric start models.
System Warning Indicators
Service Icon
Explains the purpose and function of the service indicator light.
Coolant Temperature Warnings
Describes coolant temperature alert icons and their behavior.
Low Oil Warning
Details the low oil warning light and associated reservoir checks.
Advanced Gauge Features
Clock and Altimeter Settings
How to set time and calibrate altitude readings on the display.
System Status Indicators
Reiterates service, coolant, and low oil warnings for clarity.
Deluxe Gauge Specific Indicators
Coolant Temperature Indicator
Function of the coolant temperature gauge and warning light.
High Beam Indicator
Indicates when the headlight high beam mode is active.
Low Oil Indicator
Function of the low oil warning light for engine lubrication.
Low Fuel Indicator
Indicates when the fuel level in the gas tank is low.
Gauge Data and Diagnostics
RPM, Speed, Clock, Altimeter Display
Navigating and displaying various data points on the gauge.
Diagnostic Codes
How to access and interpret diagnostic trouble codes for system issues.
Diagnostic Code Reference
6000 Series Codes
List of diagnostic trouble codes relevant to 6000 model snowmobiles.
8000 Series Codes
List of diagnostic trouble codes relevant to 8000 model snowmobiles.
Handlebar Adjustments
Handlebar Height/Tilt (M Model)
Procedure for adjusting handlebar height and tilt on M models.
Speedometer/Tachometer Angle (8000)
Adjusting the angle of the gauge cluster for operator visibility.
Engine Air and Exhaust Systems
Exhaust System Function
Purpose and importance of the exhaust system for performance and noise reduction.
Air-Intake Silencer Role
Role of the silencer in the air intake system for noise reduction.
Cooling System and Battery
Cooling System Inspection
Daily checks for leaks, damage, and coolant level in the cooling system.
Battery Care and Jump-Starting
Importance of battery charge, connections, and safe jump-starting precautions.
Drive Clutch and Driven Clutch Service
Clutch Maintenance and Cleaning
Keeping clutches clean and periodic inspection requirements.
Clutch Alignment Check
Checking and correcting drive/driven clutch alignment for belt wear.
Fuel and Suspension Components
Fuel Pump Function and Troubleshooting
Purpose and troubleshooting of the fuel pump system.
Shock Absorber Inspection
Inspection and servicing of rebuildable gas shock absorbers.
Track Information (ZR/XF, M/XF)
Info on track wear for ZR/XF and features of Paddle Track for M/XF.
Track Stud Installation and Safety
Track Stud Installation Guidelines
Procedures and warnings for installing track studs to prevent damage.
Reverse Operation
Using the Reverse Function
How to engage and operate the reverse gear safely and effectively.
Reverse Gear Operation
Shifting Into Reverse
Steps for engaging the reverse gear at the correct engine RPM.
Operating in Reverse Safely
Guidelines for safe reverse operation to prevent damage or injury.
Body Panel Access
Access Panel/Hood Removal and Installation
Procedure for removing and installing the access panel and hood.
Removable Seat
Seat Removal and Installation
Steps to remove and install the seat, including LXR heater connector.
Specific Component Procedures
Seat Removal (M Model)
Specific steps for removing the seat on M models.
Towing Procedures
Guidelines for safely towing the snowmobile by another vehicle.
Arctic Power Valve (APV) System
Explanation of the APV system's function and its effect on performance.
Engine Starting and Stopping
Pre-Start Safety Checks
Essential safety checks before starting the engine, including brake system.
Engine Starting Procedure
Step-by-step guide to starting the engine, including cold start precautions.
Engine Warm-up and Braking
Engine Warm-up Guidelines
Importance of warming up the engine before heavy operation.
Braking System Overview
General information about the hydraulic brake system and its operation.
Brake System Operation
Brake Fluid Maintenance
Maintaining proper brake fluid level, type, and avoiding contamination.
Emergency Stopping Methods
Various ways to stop the snowmobile quickly in different situations.
Throttle Monitor Switch Function
Function of the throttle monitor switch for safety during throttle operation.
Altitude Considerations
Varying Altitude Operation
How altitude affects performance and components, and recalibration needs.
Chain Case Lubrication
Checking Lubricant Level
How to check the oil level in the chain case using the sight glass.
Replacing Chain Case Lubricant
Procedure for changing the chain case oil and inspecting the seal.
Rear Suspension Maintenance
Rear Suspension Lubrication
Greasing the rear suspension components with all-temperature grease.
Fuel System Maintenance
In-Line Fuel Filter Replacement
Replacing the in-line fuel filter on 6000 models for proper fuel flow.
Fuel Hose Inspection
Inspecting fuel hoses for damage, cracks, or wear points.
Engine Oil Level Check
Checking Engine Oil (6000 Series)
How to check oil level on 6000 series models without a sight glass.
Checking Engine Oil (8000 Series)
How to check oil level on 8000 series models using the sight glass.
Spark Plug Service
Checking Spark Plugs
Inspecting spark plugs for proper heat range and condition.
Spark Plug Replacement
Steps for removing and installing spark plugs correctly.
APV Cable Adjustment
APV Cable Inspection and Adjustment
Ensuring proper tension and length of APV cables for system operation.
Battery Maintenance (Electric Start)
Removing and Charging the Battery
Procedures for battery removal, cleaning, and charging.
Battery Charging Procedures
Battery Charging Chart
Guidelines for charging sealed batteries using a constant-current charger.
Fuse System Check
Locating and Replacing Fuses
How to check and replace blown fuses in the electrical system.
Brake System Checks
Daily Brake System Inspection
Routine checks for leaks, wear, and proper operation of the brake system.
Checking and Adding Brake Fluid
Procedure for checking and refilling the brake fluid reservoir.
Brake System Service
Bleeding the Brake System
Steps to remove air from the brake lines for optimal performance.
Checking and Changing Brake Pads
Inspecting and replacing worn brake pads.
Drive Belt Maintenance
Drive Belt Inspection
Checking belt for wear, cracks, and proper dimensions.
Checking Drive Belt Deflection
Procedure to check and adjust drive belt tension for optimal fit.
Track Tension Adjustment
Checking Track Tension
How to measure and check track tension for proper performance.
Adjusting Track Tension
Procedure to tighten or loosen the track for optimal tension.
Track Alignment
Checking Track Alignment
How to verify proper track alignment relative to drive lugs.
Adjusting Track Alignment
Steps to correct track alignment for even wear and performance.
Suspension Adjustment
Adjusting Front (Ski) Shock Springs
How to adjust front shock spring pre-load for desired ride characteristics.
Air Shock Adjustment (Sno Pro)
Adjusting Fox Air Shocks
Procedures for adjusting air pressure in shocks for terrain conditions.
XF Crosstour Rear Shock Settings
Specific recommended air pressure settings for XF Crosstour rear shocks.
Skid Frame Adjustment
Adjusting Skid Frame Front Arm
Adjusting front arm shock spring and limiter straps for balance and ski pressure.
Rear Suspension Adjustment (M/XF)
Adjusting Skid Frame Rear Arm Shock Spring (M/XF)
Adjusting rear shock pre-load for M/XF models for optimal ride.
Lighting System
Taillight/Brakelight Replacement
Procedure for removing and installing the LED taillight/brakelight.
Ski Wear Bar Service
Ski Wear Bar Function and Replacement
Purpose, wear characteristics, and replacement of ski wear bars.
Ski Wear Bar Replacement
Removing Ski Wear Bars
Steps to remove existing ski wear bars from the skis.
Installing Ski Wear Bars
Procedure for installing new ski wear bars, including torque specs.
Rail Wear Strip Maintenance
Rail Wear Strip Inspection and Replacement
Checking wear strips for thickness and replacing as necessary.
Performance Optimization
Drive Belt Performance Tips
How drive belt condition and fit affect snowmobile performance.
Drive Belt Deflection Importance
Importance and adjustment of drive belt deflection for optimal power transfer.
Clutch System Maintenance
Drive Clutch/Driven Clutch Cleaning
Keeping drive and driven clutches clean of belt accumulation.
Drive Clutch/Driven Clutch Offset
Checking and correcting clutch offset to prevent premature belt wear.
Snowmobile Storage Preparation
Cleaning and Inspection for Storage
Steps for preparing the snowmobile before storage to prevent deterioration.
Engine Storage Procedure
Specific steps for storing the engine, including spark plug and fuel.
Storage Procedures
Battery Care During Storage
Maintaining the battery during extended non-start periods.
Track Tension During Storage
Adjusting track tension for storage to prevent stress.
Post-Storage Preparation
Cleaning and Inspection After Storage
Steps to take after removing the snowmobile from storage.
Battery Charging for Use
Charging the battery before the first use after storage.
U.S. EPA Emission Control Warranty
Warranty Statement and Coverage
Terms of the emissions warranty for U.S. models and covered components.
Covered Emission Components
List of major emissions control components covered by the warranty.
Owner Information Updates
Address Change
How to update your contact information with Arctic Cat.
Ownership Change / Warranty Transfer
Procedures for transferring the remaining warranty to a new owner.
Warranty Service Procedures
Owner Responsibility for Maintenance
Consumer's role in performing recommended maintenance for warranty validity.
Need help?
Do you have a question about the 2015 M 8000 and is the answer not in the manual?
Questions and answers