Digital Input Setup - Denon AVR-1802/882 Operating Instructions Manual

Digital input setup

Input the type of components connected to the digital input terminals.
1
9 COAX
2
10 OPT1
3
11 OPT2
NOTE: PHONO, TUNER and V. AUX cannot be selected.
After setting up the system
1
This completes the system setup operations. Once the system is set up, there is no need to make the settings again unless other components
or speakers are connected to or the speaker layout is changed.
Use the (left) and (right) buttons to set the type of device connected to the COAXIAL input (COAXIAL)
terminal.
CD
DVD
• Select "OFF" if nothing is connected.
Press the SELECT or (down) button to switch the optical input 1 (OPT 1) setting.
Use the (left) and (right) buttons to set the type of device connected to the OPTICAL input (OPTICAL)
terminal.
CD
TV
• Select "OFF" if nothing is connected.
Press the SELECT or (down) button to switch the optical input 2 (OPT 2) setting.
Use the (left) and (right) buttons to set the type of device connected to the OPTICAL input (OPTICAL)
terminal.
CD
CDR
• Select "OFF" if nothing is connected.
Press the SELECT or (down) button if you want to start the settings over front the beginning.
Press the SYSTEM button to finish system set up.
(Initial)
DVD TV VCR1
(left) button (right) button
(Initial)
DVD TV VCR1
(left) button (right) button
DVD TV VCR1
(left) button (right) button
VCR2 CDR OFF
VCR2 CDR OFF
(Initial)
VCR2 CDR OFF
ENGLISH
21