Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for OHAUS Adventurer Pro AV812C
Summarization of Contents
1. INTRODUCTION
1.1 Description
Overview of the Adventurer Pro balances, their capabilities, and capacities.
1.2 Features
Lists standard and optional features available on the Adventurer Pro balances.
1.3 Safety Precautions
Essential safety guidelines to follow when operating the balance.
2. INSTALLATION
2.1 Unpacking
Instructions for safely removing the balance and its components from the packaging.
2.2 Installing Components
Guide for identifying and assembling balance components and draft shield.
2.3 Selecting the Location
Guidance on choosing an appropriate and stable environment for the balance.
2.4 Leveling the Balance
Procedure for ensuring the balance is level for accurate weighing results.
2.5 Connecting Power
Instructions for connecting the AC adapter and installing batteries.
2.6 Initial Calibration
Importance and procedure for calibrating the balance upon installation.
3. OPERATION
3.1 Overview of Controls & Display Functions
Identification and explanation of balance controls and display elements.
3.2 Button Control Functions
Details on the multifunction buttons and their primary, secondary, and menu functions.
3.3 Using the Button Control Functions
How to perform basic operations like zeroing, taring, changing units, and printing.
3.4 MENU
Introduction to the balance's menu system.
3.5 Application Modes
Description of various weighing modes like Weighing, Parts Counting, Percent, etc.
3.5.6 Display Hold
Instructions for using the Display Hold mode to capture stable weights.
3.5.7 Totalize
How to use the Totalize function to measure cumulative weight.
3.6 Additional Features
Overview of extra features available on the balance.
3.6.1 Weigh Below
Details on using the weigh below hook for density or specific gravity measurements.
3.6.2 Battery Operation
Information on balance operation using batteries and battery indicators.
3.7 Balance Settings
3.7.1 Calibration
Explanation of different calibration methods: InCal, Span, Linearity, Test, Adjust.
3.7.2 Calibration Masses
Table listing calibration masses required for different balance models.
3.7.3 Setup
Configuration options including Legal Trade, Auto Tare, Auto Off, and Back Light.
3.7.4 Readout
Settings for Auto Zero, Filter, and Gross Indicator.
3.7.5 Mode
Options to enable or disable various application modes.
3.7.6 Unit
Selection and definition of weighing units, including custom units.
3.7.7 Print-1 and Print-2
Configuration of printing parameters for external devices.
3.7.8 RS232-1 and RS232-2
Settings for serial communication parameters.
3.7.10 GLP Print
Settings for Good Laboratory Practice (GLP) printing.
3.7.11 Reset
Options to reset various settings to factory defaults.
3.7.12 Lockout
Submenu to prevent unauthorized changes to settings.
3.7.13 End
Exiting the menu system and returning to the previous application.
3.8 Legal for Trade (LFT)
Information regarding compliance with weights and measures regulations.
4. MAINTENANCE
4.1 Calibration
Guidelines for periodic calibration verification.
4.2 Cleaning
Instructions for safely cleaning the balance using mild detergents.
4.3 Troubleshooting
Table of common symptoms, causes, and remedies for balance issues.
4.4 Service Information
Contact details for technical support and service assistance.
4.5 Parts
List of available replacement parts and their Ohaus part numbers.
4.6 Accessories
List of optional accessories for the balance.
5. TECHNICAL DATA
Ambient conditions
Environmental conditions (temperature, humidity) for technical data validity.
Power
Specifications related to AC adapter and battery power requirements.
Materials
Information on the materials used for the balance housing and platform.
Protection
Details on protection ratings against dust, water, and installation categories.
5.1 Drawings
Illustrations and diagrams of the balance's physical dimensions.
5.3 Capacity x Readability
Table detailing capacity and readability across different units for various models.
5.2 Specifications
Comprehensive table of technical specifications for Adventurer Pro models.
5.4 Communication
Information on the balance's RS232 and USB communication interfaces.
5.5 Compliance
Details on regulatory compliance marks and standards met by the product.
LIMITED WARRANTY
Information regarding the warranty period, coverage, and limitations.
Need help?
Do you have a question about the Adventurer Pro AV812C and is the answer not in the manual?
Questions and answers