Related Manuals for Buderus 600 - 24R
Summarization of Contents
Preface
Important General Instructions for Use
Key guidelines for safe and correct operation, installation, and maintenance of the boiler.
Regulations and Directives
Timber Framed Buildings
Specific installation guidelines for boilers in timber-framed structures.
Bathroom Installations
Requirements for installing the boiler in bathroom spaces, considering safety zones.
Compartment Installations
Design considerations and requirements for enclosing the boiler in a compartment.
Sealed System Requirements
General
General compliance requirements for sealed heating systems, including pressure and temperature suitability.
Safety Valve
Specifies requirements for the fitting and function of the safety valve.
Pressure Gauge
Details the requirements for fitting a pressure gauge to monitor system pressure.
Expansion Vessel
Outlines the necessity and specifications for an appropriately sized expansion vessel.
Cylinder
Specifies requirements for hot water cylinders used with sealed systems.
Make-up Water
Describes methods for maintaining water levels in sealed systems.
Mains Connection
Regulations regarding direct connection to the mains water supply.
Filling
Procedure and fittings required for filling a sealed heating system.
Hazard Definitions and Abbreviations
Hazard Definitions
Explains hazard symbols (Danger, Warning, Caution, Notice) and their meanings.
Abbreviations
Provides a list of technical abbreviations used throughout the manual.
Installation
Technical Specifications
Detailed technical data, dimensions, power ratings, and flue gas values for the boiler models.
Dimensions and Connections
Diagrams and measurements showing boiler dimensions and connection points for pipes and services.
Boiler Assembly - Exploded View
Illustrated breakdown of boiler components with a part list for identification and servicing.
Items Supplied with Unit
Lists the components and accessories included in the boiler package.
Hanging the Boiler
Step-by-step instructions for safely mounting the boiler onto the wall bracket.
Pipe Connections
Guidance on connecting central heating, gas, and condensate pipes according to relevant standards.
Flue Installation
Instructions and regulations for siting, installing, and connecting the flue system correctly.
Electrical Connections
Details for making the mains electrical connection, wiring regulations, and safety precautions.
External Control Connections
Information on connecting external control devices like room thermostats and programmers.
Commissioning
Requirements
Essential pre-commissioning checks, including system flushing, filling, and leak testing.
Preparing the Boiler for Operation
Procedures for purging gas systems, adjusting settings, and initial startup checks.
Inspection
General Directions
Overview of visual and functional testing procedures for the installed boiler.
Preparing the Boiler for Inspection
Steps to safely prepare the boiler, including disconnecting power and removing the casing.
Maintenance
Clean Heat Exchanger, Burner and Condensate Trap
Detailed instructions for cleaning internal components of the boiler for optimal performance.
Servicing
Operating Codes
Explains the display codes indicating the boiler's operational status and modes.
Fault Codes
Comprehensive list of error codes, their meanings, possible causes, and recommended actions.
Checking and Replacing Parts
Procedures for checking and replacing key components like sensors, fans, ignitors, and the UBA.
Conversion to Another Type of Gas
Replacing a Gas Nozzle
Steps for converting the boiler to operate with a different type of gas, including nozzle replacement.
Appendix
Short List of Spare Parts
A list of commonly required spare parts with their corresponding article numbers for easy ordering.
Reports
Start-up Report
A checklist and log for recording initial startup tasks and measurements.
Inspection and Maintenance Reports
Forms for documenting periodic inspection and maintenance activities, including readings.
Need help?
Do you have a question about the 600 - 24R and is the answer not in the manual?
Questions and answers