Related Manuals for Micom 3T
Summarization of Contents
MICOM-3 HF-SSB Radio Features
Transmitter Features
Details on output power, thermal protection, and antenna mismatch protection.
Receiver Features
Covers digital signal processing, noise blanking, and squelch functions.
Familiarization with MICOM-3 Radios
MICOM-3F Front Panel
Overview of controls and indicators on the MICOM-3F front panel.
Rear Panel (All Models)
Identification and function of connectors on the rear panel.
General Procedures
Using the Keypad
Guide to operating the radio using the front panel keypad.
Function Keys
Explanation of soft keys (F1-F4) and their dynamic functions.
Basic Operating Instructions
Turning the Radio On and Off
Step-by-step guide to powering the radio on and off.
Transmitting and Receiving
Procedures for transmitting voice messages and receiving calls.
Using the Channel Mode
Selecting the Channel Mode
How to select and use programmed channels for operation.
Using the Frequency Mode
VFO Operation
Using Variable Frequency Offset for simultaneous channel operation.
Using Automatic Link Establishment (ALE)
ALE Capabilities and Features
Overview of scanning, sounding, and link quality analysis.
Selective Calling
How to establish links with specific stations or groups.
ALE Programming
ALE Mode Options
Configuration options for various ALE features and parameters.
Receiving and Transmitting Calls in ALE Mode
Receiving Calls in ALE Mode
How the radio indicates and handles incoming ALE calls.
Link State
Link State Options
Functions available while a link is active, like viewing messages or changing channels.
Transmitting Calls in ALE Mode
Selecting the Desired Net
How to choose the network for transmitting ALE calls.
Using the Programming Mode
To enter the Programming mode
Step-by-step instructions to access the radio's programming menu.
Using the MICOM-3 GPS Receiver
GPS Receiver Functions
Overview of the GPS receiver's capabilities for data acquisition.
Format of GPS Information
Explanation of LLA and ECEF formats for GPS data display.
Installation
General
General procedures and considerations for installing the radio.
Radio Installation Planning
Guidance on selecting a suitable location and preparing for installation.
Installation Procedures
DC Power Connection
Detailed instructions for connecting the radio to a 12V DC power source.
Connectors
MICOM-3F/3T Microphone Connector
Pin functions for the microphone connector on MICOM-3F/3T.
MICOM-3R Audio Connectors
Pin functions for the audio connectors on the MICOM-3R.
Maintenance
Preventative Maintenance
Routine checks for system integrity and calibration.
Appendix A micomTrooper 3 5-50 Watt HF-SSB Backpack Transceiver
Preparing the micomTrooper 3 for Operation
Instructions for preparing the micomTrooper 3 for backpack operation.
Using the micomTrooper 3 Battery Charger, FLN9541
FLN9541 Operating Instructions
Step-by-step guide for operating the battery charger.
Need help?
Do you have a question about the 3T and is the answer not in the manual?
Questions and answers