Lexicon STUDIO - ADDENDUM Manual page 21

Multi-Record
Multi-Record selection is required to record multiple channels of audio simultaneously.
Please note, this selection also allows multiple MIDI streams to be recorded at the same
time, the other items in this menu refer only to MIDI.
Assigning Input Channels
21.
Lexicon Studio User Guide Addendum
Prior to monitoring input of audio, there are
four selections you must make:
1. Make sure your Cubase monitoring is set
to Tape Type (or use Punch Record for
live monitoring).
2. An input must be enabled. This is found
within the Audio menu as Input.
3. An input channel must be assigned to a
track. This is done by Control-clicking on
the Input Button. This may also be done
using the Input Button on the mixer page
channel strip.
4. Highlight the desired track for input on
within the Arrange window and click the
Input Button to enable monitoring of the
selected input signal.