Specifications - Lexicon OMEGA Owner's Manual

OMEGA TM

SPECIFICATIONS

Microphone Inputs:
Input Impedance:
Phantom Power:
EIN:
Maximum Input Level:
Frequency Response:
THD+N:
Insert Inputs:
Send Level (tip):
Maximum Return Level (ring):
Line Inputs:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Instrument Input:
Input Impedance:
Maximum Input Level:
Frequency Response:
THD+N:
Crosstalk:
Line Outputs:
Level:
Impedance:
Headphone Output:
MIDI Interface:
Digital Audio Input:
Digital Audio Output:
D/A and A/D Conversion
Sample Rate:
Dynamic Range:
A/D
D/A
A/D/A
Analog Path:
USB Type B Socket:
Power Requirements:
Dimensions:
Weight:
Lexicon engineers are constantly working to improve the quality of our products. Specifications are, therefore subject to
change without notice.
17
(2) Female XLR Pin 2 Hot
600 Ohms balanced
+48 Volt
-118dB @ 51dB gain (150 Ohm source impedance) -120 dB A-
weighted
+18 dBu (150 Ohm source impedance)
+0, -0.2 dB 20 Hz - 20 kHz, ref. 1 kHz
<.005%, 20 Hz - 20 kHz
(2) 1/4" TRS
+19 dBu maximum
+19 dBu maximum
(4) 1/4" TRS balanced or unbalanced
20 kOhm balanced, 10 kOhm unbalanced
+22 dBu (40 Ohm source impedance)
+0, -0.2 dB 20 Hz - 20 kHz, ref. 1kHz
<.012% A/D, 20 Hz - 20 kHz, <.012% A/D/A, 20 Hz - 20 kHz
(1) 1/4" mono jack
1 MOhm unbalanced
+19 dBu
+0, -0.25 dB 20 Hz - 20 kHz, ref. 1 kHz
<.0125% A/D
<-74dB any input or output to any recording channel, 20 Hz-20 kHz
<-95dB at 1 kHz typical
(2) 1/4" TRS balanced or unbalanced
+19 dBu maximum
110 Ohms
(1) 1/4" stereo jack
100 mW per channel at 50 Ohms
5 pin DIN connectors for MIDI in and MIDI out
Coaxial RCA (S/PDIF format)
Coaxial RCA (S/PDIF format) always transmits the audio data from
the USB stream
44.1 kHz or 48 kHz (determined by computer application)
>101 dB typical, unweighted, 20 Hz - 20 kHz
>104 dB typical, A-weighted, 20 Hz - 20 kHz
>107 dB typical, unweighted, 20 Hz - 20 kHz
>109 dB typical, A-weighted, 20 Hz - 20 kHz
>100 dB typical, unweighted, 20 Hz - 20 kHz
>103 dB typical, A-weighted, 20 Hz - 20 kHz
>115 dB typical, unweighted, 20 Hz - 20 kHz
>118 dB typical, A-weighted, 20 Hz - 20 kHz
Version 1.1, Version 1.1 hubs are not supported
PS0913-B adapter supplied
4.625"W x 7.25"H x 7.75" D (118mm x 184mm x 197mm)
2.65 lbs.
Specifications