Lexicon MPX G2 V1.1 - INSTALLATION AND RELEASE NOTES Installation Instructions Manual page 13

MPX G2
Comp (S) Parameters
Label Values
Mix 0 to 100%
Off, -95 to
0dB
Level Off, -89dB
to +6dB
Sense -72 to +24
Thrsh -83 to 0dB
Gain -72 to +24
ATime 0 to 2000
RTime 0 to 2000
Software Version 1.1 Installation Instructions & Release Notes
Description
Sets the wet-to-dry ratio of the
input signal as a percentage
Sets the dry level of the input
signal
Sets the wet level of the
input signal
Sets the pre-compression
level of the input signal
Sets the level above which
the pitch detector tracks
Sets the post-compression
level of the input signal
Sets attack time
Sets release time
RingMod Parameters
Label Values
Mix 0 to 100%
Off, -95 to
0dB
Level Off, -89dB
to +6dB
Freq 1 to 8000
Bal -50 to 50
Rate 0 to 50.00Hz
(1:24 to 24:1
cycles/beat)
PW 0 to 100%
Depth 0 to 100%
Type Sine, Trian,
Squar
Description
Sets the wet-to-dry ratio of the
input signal as a percentage
Sets the dry level of the input
signal
Sets the wet level of the
input signal
Carrier frequency
Left/right pan control
LFO rate or period ratio
LFO pulse width
LFO depth
LFO shape: sine, triangle or
square
13