About The Dual Programs - Lexicon MP-100 User Manual

MP-100 Programs and Parameters

About the Dual Programs

The MPX 100 Dual programs combine either a Delay or Reverb algorithm with a Flange, a Pitch or
a Chorus. Effects Lvl/Bal controls the relative balance of each effect in the combination.
Four routing configurations are used in the variations of each Dual program: Dual Stereo (Parallel),
Cascade, Mono Split and Dual Mono.
Programs 1-6 are set up in the Parallel configuration - two
stereo effects placed side by side so that they receive and
output stereo audio from both left and right channels.
Programs 7-10 are set up in the Cascade configuration -
two stereo effects, one placed after the other (for example,
Flange-Delay, Flange passes its stereo signal to the
Delay).
Programs 11-14 are set up in the Mono Split configuration
which is similar to Parallel, however one effect (Flange)
receives audio from the left input and the other effect
(Delay) receives audio from the right input. Both effects
then output stereo audio.
Programs 15 and 16 are set up in the Dual Mono configu-
ration where one effect (Flange) appears on the left
channel only and the other effect (Delay) appears on the
right channel only.
32
32
Dual Stereo (Parallel)
L
A
Programs
1-6
B
R
Cascade
L
Programs
A
7-10
R
Mono Split
L
A
Programs
11-14
R
B
Dual Mono
L
A
Programs
15-16
R
B
Lexicon
L
R
L
B
R
L
R
L
R