Lexicon MP-100 User Manual page 16

MP-100 User Guide
The diagram below is a flow chart of a routing example. Notice that PC-90 receives its input from
Cubase VST via the VST_Aux_Send_1L and VST_Aux_Send_1R sources. These sources route
any audio assigned to that bus into the MP-100.
Aux Send Sum
As Analog_Out_L and Analog_Out_R are selected as destinations, MP-100 audio is summed with
the outputs of Cubase VST, which are also routed to the analog outputs. This allows monitoring of
MP-100 reverb and all audio from VST through the same outputs of the interface.
Cascade with Input
VST_Aux_Send_1L
Wave VST_Aux_Send_1R
or
ASIO
Inputs
VST_Analog_L
VST_Analog_R
Core2
Inputs
A/D 1
MP-100
A/D 2
MP-100
Analog_Out_L
Analog_Out_R
Core2
Cascade with Output
Wave or
Wave or
ASIO Inputs ASIO Outputs
A/D 1
D/A 1
A/D 2
D/A 2
Using the MP-100
D/A 1
Core2
D/A 2
Outputs
Core2
Outputs
D/A 1
MP-100
D/A 2
13
13