Bank: Flange - Lexicon MP-100 User Manual

Reverb & effects card for the core2 audio system
Table of Contents

Advertisement

MP-100 User Guide

Bank: Flange

The stereo Flange programs have two 2-tap delays —one per channel. The first tap is fixed, and the
second sweeps past it. Mixing the two delay taps together creates the flanging effect.
All of these programs should be used with Mix set to fully Wet to achieve the full flange effect.
Flange Programs
Light Flange: in phase sweep
Light Flange: out of phase sweep
Light Flange: in phase sweep
Light Flange: out of phase sweep
Deep Flange: in phase sweep
Deep Flange: out of phase sweep
Light Flange
Deep Flange
Flanging effects were originally created by simultaneously recording and playing back two identical
programs on two tape recorders, then using hand pressure against the flange of the tape reels to
slow down first one machine, then the other. The result was a series of changing phase cancella-
tions and reinforcements, with a characteristic swishing, tunnelling and fading sound.
MP-100 Programs and Parameters
Effect Parameter
Resonance
Resonance
Rate
Rate
Resonance
Resonance
Sweep: 0, 90, 180, 270
Sweep: 0, 90, 180, 270
Tap
27
27

Advertisement

Table of Contents
loading

This manual is also suitable for:

Core2

Table of Contents