Using the MP-100
The reverb routing matrix is flexible, and can provide a wide array of configurations. The previous
configuration would not be ideal if, for example, you were mixing audio simultaneously from a digital
tape deck and your computer to a digital mixer, and wanted to send your reverb into your digital mixer
on independent channels. In this case, you can easily reroute your destinations to other channels,
such as TOSLINKs 1 & 2 simply by changing the output destinations on the Control Panel.
Aux Send/Aux Return
14
14
Wave or
ASIO Sources
1
Aux Send
2
Aux Send
L
Aux Return
R
Aux Return
MP-100
Lexicon