Advertisement
MODE ADJUST
DIGITAL EX &
DIGITAL
MODE ADJUST
@*DIGITAL EX
OR
Note:
The MC-12 cannot automatically detect Dolby Digital
Surround EX encoding in non-flagged 5.1-channel
Dolby Digital sources. A non-flagged input source does
not include information in the input signal that
identifies Dolby Digital Surround EX encoding.
•
Designed for playback of 5.1-channel Dolby Digital sources.
The
DIGITAL EX listening mode is recommended for Dolby
Digital sources recorded with Dolby Digital Surround EX
encoding. This listening mode can also be used with 5.1-channel
Dolby Digital sources with mixed results.
•
Decodes 5.1 discrete channels from 5.1-channel Dolby Digital
sources. The five main channels are full frequency. The .1
channel, often referred to as LFE information, has a limited
frequency range of 120Hz.
Input Source
Parameter Setting
EX DECODING: AUTO
EX DECODING: ON
EX DECODING: OFF
5-20
(continued from page 5-19)
@*DIGITAL
5.1-Channel
Dolby Digital
DIGITAL
DIGITAL EX
DIGITAL
When Dolby Digital Surround EX decoding is engaged:
•
Applies matrix decoding to derive a surround back channel
from the other surround channels.
Parameter
EX DECODING
COMPRESSION
LFE MIX
OUTPUT LEVELS
CUSTOM
Listening mode menu parameter descriptions begin on page 5-34.
5.1-Channel
Dolby Digital Surround EX
(Flagged)
DIGITAL EX
DIGITAL EX
DIGITAL
Default
Possible
Setting
Settings
AUTO
AUTO, ON, OFF
OFF
AUTO, ON, OFF
+0.0dB
-10.0 to +0.0dB
Refer to page 5-32
Refer to page 5-33
5.1-Channel
Dolby Digital Surround EX
(Non-Flagged)
DIGITAL
DIGITAL EX
DIGITAL
Lexicon
Advertisement
Chapters
