Add Event - D-Link DCS-6511 User Manual

Hd day & night vandal-proof fixed dome network camera

Hide thumbs Also See for DCS-6511:

Table of Contents

Section 4 - D-ViewCam Installation

Create and schedule up to three events with their own settings here.

Event name:

Enter a name for the event.

Enable this event:

Select this box to activate this event.

Priority:

Set the priority for this event. The event with higher priority

will be executed first.

Delay:

Select the delay time before checking the next event. It is

being used for both events of motion detection and digital

input trigger.

Trigger:

Specify the input type that triggers the event.

Video Motion

Motion is detected during live video monitoring. Select the

Detection:

windows that need to be monitored.

Periodic:

The event is triggered in specified intervals. The trigger

interval unit is in minutes.

Digital Input:

The external digital input trigger input to the camera.

System Boot:

Triggers an event when the system boots up.

Network Lost:

Triggers an event when the network is lost.

Time:

Select Always or enter the time interval.

Trigger D/O:

Select to trigger the digital output for a specific number of seconds when an event occurs.

D-Link DCS-6511 User Manual

Add Event

Table of Contents