D-Link DCS-5605 User Manual page 20

Step 23 - If you have the DCS-5635 wireless camera, setup the following wireless settings:
Wireless - Click the Enable radio button. If you do not want to use the wireless feature of the camera, click Disable.
Connection Mode - Select Infrastructure if you are connecting to a wireless router or access point. If you are connecting to a
wireless client, select Adhoc.
Network Name (SSID) - Enter the SSID or wireless network name. This must be the same name as on your wireless router or
access point.
Wireless Channel - If you select Infrastructure, select Auto since the wireless router or access point will select the channel
automatically.
Authentication - Select Open, Shared, WPA-PSK, or WPA2-PSK.
Encryption - Depending on Authentication, select the type of encryption.
Key - Enter the encryption key or passphrase.
Click Next to continue.
D-Link DCS-5605/DCS-5635 User Manual 19