Hardware Overview; Rear - D-Link DCS-5605 User Manual

1
Micro SD Port
2 WPS (DCS-5635 Only)
3 Power Receptor
4
Ethernet Port
5 I/O Connector
6 Video/Audio Line-Out Port
7 External Microphone Port
8
Reset Button
Antenna
9 connector(DCS-5635
Only)
D-Link DCS-5605/DCS-5635 User Manual

Hardware Overview

Insert a Micro SD memory card to save data from
the camera.
Press the WPS button to automatically connect
to a WPS-enabled wireless router or access point
and establish connectivity.
Plug in the supplied power adapter to an outlet.
Connect an Ethernet cable to a router, switch, or
computer. The Ethernet port can also be used to
power the camera using a PoE switch (DCS-5605
only).
The camera provides a terminal block with two
pairs of connectors situated on the back panel. One
pair is for input and the other is for output. The I/O
connectors provide the physical interface to send
and receive digital signals to a variety of external
alarm devices. Please refer to the I/O Connector
section in this manual for detailed information.
Plug the included A/V cable into the A/V out
connector to use the camera with a television or
VCR, or connect to speakers.
Insert an external microphone to record audio.
Press and hold for 10 seconds to reset the camera
back to the default settings.
Connects to the wireless antennas

Rear

1
2 3 4 5 6 7
9
8
6