Set as Home:
Click to set the current camera position as Home.
Default Home:
Click to set Home to the default camera position.
Pan Speed:
Change the pan speed from the drop-down (1-10, 10 = fastest).
Tilt Speed:
Change the tilt speed from the drop-down (1-10, 10 = fastest).
Current Postion:
Once you move the camera to a position you like, enter a name for the location and then click Add.
Patrol Selection:
Allows you to add saved locations from the Preset Locations box into the Selected Locations box. This will determine
where the camera will travel to and stop at when you select Auto Patrol on the Live Video page.
Pan/Patrol
Speed:
The Pan/Patrol Speed control applies only when using the Pan and Patrol buttons in the live video interface.
Dwelling Time:
Specify the number of seconds that the camera should remain fixed upon a specified preset position.
D-Link DCS-5605/DCS-5635 User Manual
Preset Position
53