Adding A Device Entry - HP Sa3110 - VPN Server Appliance Getting Started Manual

Using the VPN Client Deployment Tool for the First Time
Steps
4-8
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide

Adding a Device Entry

You must add a device entry that contains information such as
the name and IP address of an HP VPN Server Appliance SA3110/
SA3400/SA3460 devices to be assigned to a user or group. You
can also add device information by polling a device and
extracting its configuration information.
To add a device entry:
1. In the left-hand navigation bar, click Devices.
The Devices window appears.
2. Click Clear.
3. In the Device Name field, enter the device host name.
The maximum limit of the Name field is 16 characters.
4. In the Description field, enter the full description for the device.
5. In the IP Address/DNS Entry field, enter the IP address or
DNS entry of the device.
This IP address is the one that the client uses to negotiate a
tunnel with the gateway device.
6. In the Automatic Device Configuration area, you may select
the Device can be polled check box to automatically extract
its configuration. Otherwise, go to step 10.
7. In the Poll IP Address/DNS Entry field, enter the IP address or
DNS entry to be used to obtain the device configuration
(typically, an IP address on the red (trusted) side of the network).
8. In the Login Name field, enter the login name for the device
that is polled.
9. In the Login Password field, enter the login password for the
device that is being polled.
10. Click Save.
The device entry you created appears in the list box, with the
information you specified appearing in the appropriate
columns. Devices that have polling enabled appear with a
plug connector symbol next to the device name.
11. Click Poll Devices to automatically populate the Tunnels sec-
tion of your corporation's configuration if you have pollable
devices defined.