Adding A Corporation Entry - HP Sa3110 - VPN Server Appliance Getting Started Manual

Using the VPN Client Deployment Tool for the First Time
Prerequisite
Steps
4-6
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide

Adding a Corporation Entry

The first time you log in to the VPN Client Deployment Tool, the
system requires that you create a corporation entry before you
can do anything else. More corporation entries can be added
later. When adding a corporation entry, you provide the
corporation name, description, mail server, and Web server
URL.
Create an e-mail template text file. See "Creating an E-mail
Template File" in the previous section.
To add a corporate entry:
1. In the left-hand navigation bar, click Setup.
The Setup window appears.
Note: If you are adding a corporation for the first time, the
Setup window automatically appears after the initial login
and the Continue Login button appears, but is disabled at
this point.
2. Click Clear.
3. In the Corporation Name field, enter an abbreviated name
for the corporation.
The Corporation Name field is 1 to 8 characters.
4. In the Description field, enter the full name of the
corporation.
The Description field is 1 to 50 characters.
5. In the Mail Server IP Address field, enter the IP address of
the corporation's mail server. This can be entered in numeral
form (127.0.0.1) or as a domain name
(mail.corporationx.com).
6. In the Port field, use the default port number.
The default port number is 25.
7. In the Sender's Email Address field, enter the VPN Client
Deployment Tool administrator's e-mail address.
Note: You cannot deploy without a valid e-mail address in
this field. An invalid address results in a false deployment.