Adding A Tunnel Entry - HP Sa3110 - VPN Server Appliance Getting Started Manual

Steps

Adding a Tunnel Entry

You must add tunnel information, including the device name,
tunnel name, authentication type, tunnel protocol, and port
number.
If you have a large number of tunnels, use device polling to add
the information to your corporation entry. See "Adding a Device
Entry" earlier in this document for more information.
To add a tunnel entry:
1. In the left-hand side navigation bar, click Tunnels.
The Tunnels window appears.
2. Click Clear.
3. In the Device Name field, select the device name from the
drop-down list.
4. In the Tunnel Name field, enter a descriptive name for the
tunnel.
5. In the Authentication Type drop-down list, select the method
of authentication.
The default is VPNG.
6. Select the Multi-user check box if the tunnel you are creating
is a multiuser tunnel.
The default is a clear check box, indicating a single-user
tunnel.
7. Select the WINS Tunnel check box if the tunnel is WINS
capable.
The default is a selected check box, indicating that the tunnel
is WINS capable.
8. In the Tunnel Type drop-down list, select either SST (Shiva®
Smart Tunneling) or IPSec.
9. In the Protocol field, enter the type of protocol you want to
use to establish a tunnel.
The default protocol is UDP.
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide

Adding a Tunnel Entry

4-9