Logging In To The Vpn Client Deployment Tool Manager - HP Sa3110 - VPN Server Appliance Getting Started Manual

Prerequisite
Steps
Logging In to the VPN Client
Deployment Tool Manager
You must first log in to the VPN Client Deployment Tool Manager
and select a corporation to use (if more than one exists).
Ensure that the Adaptive Server Anywhere database service is
running. Start the VPN Client Deployment Tool Manager. See
"Starting the VPN Client Deployment Tool" in the previous
section of this document for more information.
To Log Into the VPN Client Deployment Tool Manager:
1. In the Login Name field, enter
2. In the Password field, enter
Note: The Login Name and Password are case sensitive.
3. Click Login.
If you already added corporation entries, the Corporation
Selection dialog box appears.
Otherwise, if this is the first time you are logging in, the Setup
window appears here. You must add a corporation entry
before continuing with the log in process. See "Adding a
Corporation Entry" later in this document for detailed
information on adding a corporation entry to the VPN Client
Deployment Tool.
4. In the Corporation Selection dialog box, select a corporation
entry in the drop-down list.
Note: If only one corporation entry is defined, it is selected
by default and opens automatically.
5. Click OK.
Hewlett-Packard SA3000 Series VPN Client Deployment Tool Getting Started Guide

Logging In to the VPN Client Deployment Tool Manager

admin
admin
.
.
4-5