Installing Vpn Client - HP Sa3110 - VPN Server Appliance Installation Manual

Steps Steps
Steps Steps
Hewlett-Packard VPN Server Appliance SA3110/SA3150/SA3400/SA3450 Installation Guide

Installing VPN Client

Installing VPN Client
Installing VPN Client Installing VPN Client
In this section, you install VPN Client on your PC.
Note: All network adapters to be secured using the VPN Client Note:
Note: Note:
must have TCP/IP bound to them before installation.
To install VPN Client on your PC:
1. Quit all applications.
2. Place the CD-ROM into your computer's CD-ROM drive.
3. In the Start menu, select Run.
4. In the Run window, select Browse and select your
computer's
CD-ROM drive (for example, E:\).
5. Select setup.exe and click OK.
6. In the Run window, click OK.
7. Select Yes to accept the displayed License Agreement.
The User Information Window appears.
8. Enter your name and the name of your company. Select Next
to continue.
The Choose Destination Location window appears.
9. Enter the location where you want VPN Client to be installed
or select Next to accept and use the default folder location.
The Select Program Folder window appears.
10. Enter the name you want to have appear under the desktop
icon and in the program folders list, or select Next to accept
and use the default name.
The User Configuration Disk pop-up window appears with
the following question:
Have you been provided with a User Configuration disk?
11. Unless your system administrator gave you a disk with the
VPN Client configuration on it, select No.
12. In the Maximum number of WINS capable tunnels field,
select the maximum number of concurrent Windows
Internet Working Services (WINS) enabled tunnels you want
Installing VPN Client
5-3