Image Setup - D-Link DCS-3112 User Manual

Section 3 - Configuration
In this section, you may configure the video image settings for your camera. A preview of the image will be shown in Live Video.
Enable Privacy The Privacy Mask setting allows you to specify up to 3 rectangular areas on
Mask: the camera's image to be blocked/excluded from recordings and snapshots.
You may click and drag the mouse cursor over the camera image to draw a
mask area. Right clicking on the camera image brings up the following menu
options:
Disable All: Disables all mask areas.
Enable All: Enables all mask areas.
Reset All: Clears all mask areas.
Mirror:
Mirrors the images.
Rotates the image 180 degrees.
Flip:
If this option is enabled, white objects will be rendered as white on the screen.
White Balance:
Changes the exposure mode. Use the drop-down box to set the camera for
Exposure Mode:
Indoor, Outdoor, or Night environments, or to capture Moving objects. The
Low Noise option will focus on creating a high-quality picture without noise.
You can also create 3 different custom exposure modes. The Max Gain setting
will allow you to control the maximum amount of gain to apply to brighten
the picture.
This setting controls the amount of noise reduction that will be applied to the picture.
Denoise:
Adjust this setting to compensate for backlit subjects.
Brightness:
Adjust this setting to alter the color intensity/strength.
Contrast:
This setting controls the amount of coloration, from grayscale to fully saturated.
Saturation:
Specify a value from 0 to 8 for image edge enhancement.
Sharpness:
Click this button to reset the image to factory default settings.
Reset Default:
D-Link DCS-3112 User Manual

Image Setup

29