Application - D-Link DCS-3112 User Manual

Section 3 - Configuration
In a typical application, when motion is detected, the DCS-3112 Network Camera sends images to a FTP server or via e-mail as notifications. As
shown in the illustration below, an event can be triggered by many sources, such as motion detection or external digital input devices. When an
event is triggered, a specified action will be performed. You can configure the Network Camera to send snapshots or videos to your e-mail address
or FTP site.
To start plotting an event, it is suggested to configure server and media columns first so that the Network Camera will know what action shall be
performed when a trigger is activated.
D-Link DCS-3112 User Manual

Application

Event Condition
ex.
Motion detection,
Periodically, Digital input,
System reboot
Media
(what to send)
ex.
Snapshot, Video Clips
Action
Server
(where to send)
ex.
Email, FTP
36