Western Digital WDA4NC20000 - ShareSpace NAS 2TB HD 1TB x 2 RAID User Manual page 35

d. Click Start Backup to begin backing up all of files and folders on the internal
hard drive
and skip to
7. To backup selected files or folders:
a. Verify that the backup mode is file and that Ready to perform file backup
appears at the upper-left corner of the Backup screen.
If the backup mode is category and Ready to perform category backup
appears there, then click the Switch to File Backup button and OK at the
Switching Backup Plan prompt.
b. In the backup by files selection box, click the pointers to open the folder
structure:
c. Select the check boxes for the individual files or folders that you want to back up.
Note that selecting a folder check box automatically selects all of the subfolders
and files in the folder.
d. Click Apply Changes to create a custom backup plan and update the content
gauge for your external device.
Note: Clicking Revert clears your recent selections and redisplays the prior applied
configuration.
e. Click Start Backup to begin backing up the selected files or folders and proceed
to step 8.
8. During the backup:
• A progress bar and message indicate the amount of data that has been backed
up.
• For a category backup, the blue background in the content gauge for your
computer's internal hard drive changes to yellow/amber for all of the files that
have not yet been backed up.
• The gray background for categories or files in the content gauge for your external
device changes to blue as the backup completes.
• You can continue to set up your drive or perform any other functions because the
WD SmartWare software backs up your files in the background.
• The Start Backup toggle button changes to Stop Backup for stopping the
backup (see step 10 on page 32).
step 8 on page 31.
WD SMARTWARE SOFTWARE
USER MANUAL
BACKING UP YOUR COMPUTER FILES – 31