Table of Contents
Advertisement
USER'S MANUAL
Thank you very much for purchasing this product.
To ensure correct and safe usage with a full understanding of this product's performance, please be
sure to read through this manual completely and store it in a safe location.
Unauthorized copying or transferral, in whole or in part, of this manual is prohibited.
The contents of this operation manual and the specifications of this product are subject to change
without notice.
The operation manual and the product have been prepared and tested as much as possible. If you
find any misprint or error, please inform us.
Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may
occur through use of this product, regardless of any failure to perform on the part of this product.
Roland DG Corp. assumes no responsibility for any direct or indirect loss or damage which may
occur with respect to any article made using this product.
Advertisement
Table of Contents
Related Manuals for Roland Stika SV-8
Summarization of Contents
Read This First
Machine Functions Overview
Explains the various functionalities and uses of the STIKA cutting machine with different software.
To Ensure Safe Use
Safety Warning Definitions and Symbols
Defines WARNING/CAUTION notices and explains common hazard symbols used in the manual.
Safe Operation and Electrical Precautions
Provides general safety rules for operating the machine, including electrical and handling precautions.
Power Cord and Outlet Safety Practices
Details safe practices for using the power cord, plug, and electrical outlet to prevent hazards.
Important Notes on Handling and Use
Machine Handling and Installation Precautions
Covers proper handling of the precision device, installation location, and cable connection.
Safe Machine Moving Procedures
Provides instructions on how to safely move the STIKA machine without causing damage.
Chapter 1: Setup Preparation
Included Items Checklist
Lists all items packed with the STIKA unit to ensure completeness upon unboxing.
Main Unit Part Identification
Identifies and labels the various parts of the main STIKA cutting unit.
Installation and Connection Procedures
Guides through site selection, space management, packing removal, and cable connection.
Chapter 2: Installing Software
Overview of Included Software
Describes the software components provided on the CD-ROM for Windows and Macintosh.
Windows Software Installation Guide
Details system requirements and step-by-step instructions for installing software on Windows.
Macintosh Software Installation Guide
Details system requirements and step-by-step instructions for installing software on Macintosh.
Chapter 3: Performing Cutting
Material Guidelines Before Cutting
Explains usable material types, conditions to avoid, and how to use roll material.
Basic Cutting Workflow
Covers the essential steps: loading material, creating data, performing the cut, and applying the material.
Chapter 4: Mastering the STIKA
Optimizing Cutting Quality
Guides on checking cutting quality and adjusting blade extension for best results.
Advanced Cutting Data Creation
Explains creating text data, importing image files, and deleting unwanted cutting lines.
Applying Large Materials Effectively
Provides techniques for applying larger cut materials to surfaces without bubbles or slippage.
Chapter 5: Maintenance
Routine Cleaning Procedures
Instructions for cleaning the blade tip, blade holder, and the main unit of the machine.
Replacing Consumable Parts
Step-by-step guide for replacing the cutting blade and the blade protector.
Chapter 6: Appendix
Troubleshooting Common Issues
Addresses common problems like machine not running, poor cuts, and shifted locations.
Machine Specifications and Support Information
Covers shaft lubrication, cutting ranges, label locations, and overall product specifications.
Need help?
Do you have a question about the Stika SV-8 and is the answer not in the manual?
Questions and answers