NETGEAR RN12P0610 - ReadyNAS 3200 Hardware Manual page 30

ReadyNAS 3200 Hardware Manual
2. Pull out the disk tray, and replace the failed disk.
Figure 2-8
Make sure that the hard disk connectors face the interior of the disk bay when you reassemble
the disk.
3. Slide the disk tray back into the ReadyNAS and secure the handle.
The volume automatically synchronizes with the new disk in the background, taking several
hours depending on the disk size. The ReadyNAS can continue to be used, although access
will be slower until the volume synchronization finishes. You will be notified by e-mail when
the process is complete.
2-12
v1.1, July 2009
Diagnostics and Maintenance